Notifiche
Cancella tutti
Heatbed not heating
My heatbed doesn't heat up anymore. When the heatbed is not plugged in in the heatbed output connector on the RAMBo, LED6 goes on when I ask the printer to heat the heatbed. But I messure les than 6 V between the pins of the output. when i plug the heatbed in LED6 goes out en I mesure 0V between the pins.
Postato : 21/06/2018 8:32 am
Re: Heatbed not heating
sounds like you need to talk to support and get a new board.
Postato : 21/06/2018 11:07 pm