Dragon Hotend Mod keeps...clogging? I don't know exactly. Stops extruding anyway.
 
Notifications
Clear all

Dragon Hotend Mod keeps...clogging? I don't know exactly. Stops extruding anyway.  

Strona 2 / 2
  RSS
cwbullet
(@cwbullet)
Member
success

Have you been successful yet?

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 30/07/2021 11:19 pm
vanayad
(@vanayad)
Eminent Member
Topic starter answered:
still clogged

Hi,

even after unclogging the dragon (coldpulls + material extrusion), the moment when I start printing, it stops printing. Sometimes after 5 minutes, sometimes after 1h.  (1 benchy takes 1h30min).

Right now I am out of ideas of what I could possibly do. I had so many issues with this hotend, and with the printer in general, that I am simply disappointed.

Posted by: @cwbullet

Have you been successful yet?

 

Opublikowany : 31/07/2021 7:04 am
cwbullet
(@cwbullet)
Member
clog

You must have a lemon or there is something different with your setup.  I have one on a Mini and two on Mk3S and I have not had an issue with repeated clogging.  I did have one filament I could not get to print.  I also had an issue printing with that filament on my mosquito.  It printed fine with the V6.  I have no idea why.    

I will keep thinking.  Good luck.  

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 31/07/2021 11:21 am
Oz^2
 Oz^2
(@oz2)
New Member
RE: Dragon Hotend Mod keeps...clogging? I don't know exactly. Stops extruding anyway.

did you ever fix this? I put a blower fan onto the heat sink, added copper strips coming out of the heat sink for heat dissipation and im lucky to get through a couple layers,.. It has been a while since you posted anything, so maybe you figured something out?

 

Opublikowany : 08/03/2023 5:00 pm
vanayad
(@vanayad)
Eminent Member
Topic starter answered:
RE: Dragon Hotend Mod keeps...clogging? I don't know exactly. Stops extruding anyway.

Hi,

 

no, I stopped trying to be honest. It was such a headache that it wasn't even funny. I want to print, not to tinker 24/7 with my printer...and sadly I had more issues than success stories for a long time. Nowadays I print with mostly stock (using a volcano mod) and that's it. Print time is still insanely long, but I get quality at least. Don't want to risk either downtime or other 'surprises'. 

And if I want something done faster/better..I'll eventually get prusa XL or something similar if I can find and use that instead. I don't want to touch the current printer with mods anymore 😛

Opublikowany : 08/03/2023 5:18 pm
Strona 2 / 2
Share: