Benachrichtigungen
Alles löschen

Useful Tools & Materials For 3D Printing  

  RSS
watsonjimmy303
(@watsonjimmy303)
New Member
Useful Tools & Materials For 3D Printing

I recently put together a video about some of my favourite tools/materials to have alongside my 3D printer!

My last video 'How To Service Your Prusa' had a great response here, so I thought I'd share this one too. Hopefully it becomes of use to some beginners out there! Let me know what tools you guys like to use alongside your printers... I'm keen to find out!

https://sarkariresult.onl/ mobdro https://pnrstatus.vip/

Veröffentlicht : 23/09/2019 10:55 am
cwbullet
(@cwbullet)
Mitglied
RE: Useful Tools & Materials For 3D Printing

Plastic sticker remover from amazon.  It has removable blades. https://www.amazon.com/Ehdis-Visibility-Plastic-Scraping-Windshields/dp/B01HLWB0BM/ref=mp_s_a_1_2?keywords=blades+plastic&qid=1569238640&s=gateway&sr=8-2

--------------------
Chuck H
3D Printer Review Blog

Veröffentlicht : 23/09/2019 11:36 am
Chocki
(@chocki)
Prominent Member
RE: Useful Tools & Materials For 3D Printing

But this one comes in PRUSA printer colors there are two of them and has more blades for only a Dollar more! 😉 

https://www.amazon.com/dp/B07R7HF8F6/ref=sspa_dk_detail_2?psc=1&pd_rd_i=B07R7HF8F6&pd_rd_w=781j5&pf_rd_p=45a72588-80f7-4414-9851-786f6c16d42b&pd_rd_wg=PDfN1&pf_rd_r=VH351AP0Y457BDT7ZWQ7&pd_rd_r=6a9b7e65-8eed-4bee-b2e8-597f0e4d393b&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFMSVpFTTBGWDY1NFUmZW5jcnlwdGVkSWQ9QTA4NDI2NThFS1NFN0lMMDFRNEsmZW5jcnlwdGVkQWRJZD1BMDQyNDgxNzJPTDRVWUlXNEdPMTUmd2lkZ2V0TmFtZT1zcF9kZXRhaWwmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

The link above is also a heck of a lot longer? 😜 

Diese r Beitrag wurde geändert Vor 5 years 2 mal von Chocki

Normal people believe that if it ain’t broke, don’t fix it. Engineers believe that if it ain’t broke, it doesn’t have enough features yet.

Veröffentlicht : 23/09/2019 2:43 pm
cwbullet
(@cwbullet)
Mitglied
RE: Useful Tools & Materials For 3D Printing

I like those and the blades some in several colors.  

--------------------
Chuck H
3D Printer Review Blog

Veröffentlicht : 23/09/2019 3:44 pm
Sembazuru
(@sembazuru)
Prominent Member
RE: Useful Tools & Materials For 3D Printing
Posted by: @watsonjimmy303

I recently put together a video about some of my favourite tools/materials to have alongside my 3D printer!

My last video 'How To Service Your Prusa' had a great response here, so I thought I'd share this one too. Hopefully it becomes of use to some beginners out there! Let me know what tools you guys like to use alongside your printers... I'm keen to find out!

I'm not seeing any links to your videos. Did they accidentally get stripped, or did you forget to include them? 

See my (limited) designs on:
Printables - https://www.printables.com/@Sembazuru
Thingiverse - https://www.thingiverse.com/Sembazuru/designs

Veröffentlicht : 23/09/2019 3:49 pm
Chocki
(@chocki)
Prominent Member
RE: Useful Tools & Materials For 3D Printing

New member, so probably can't put any up yet.

@ Charles, to be fair the version you have shown is simpler and the blades just clip in. My version can come with questionable tapped threads for the screw clamp so two are supplied because maybe only one of them may work. 🙂 

Normal people believe that if it ain’t broke, don’t fix it. Engineers believe that if it ain’t broke, it doesn’t have enough features yet.

Veröffentlicht : 23/09/2019 4:04 pm
Bunny Science
(@bunny-science)
Noble Member
RE: Useful Tools & Materials For 3D Printing

Plastic spray bottles are great for delivering just the right amount of 99% Isopropyl Alcohol or water. A few sprays and I conveniently get them applied for wiping down the print plate or solubilizing PVA glue stick. Much neater and precise than attempting to dribble out of a bottle. Also keeps the liquids from evaporating.

You can even spray the hot plate during Live-Z with the IPA to "thermal shock" the test sheet off the heat bed. No need for fancy chill spray.

Probably don't want any sparks, but the small amount of vaporized alcohol dissipates rapidly and isn't explosive as one may fear.

Speaking of IPA, the "rubbing alcohol" or 91% stuff you find at drug stores can have too much water or other content. Go for the 99% stuff.

 

$5 for three spray bottles https://www.amazon.com/gp/product/B01H5B2YNM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

$32 for 12 x 16oz bottles https://www.amazon.com/gp/product/B01ABPUGH0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

Veröffentlicht : 27/09/2019 1:05 am
johnsmith908412
(@johnsmith908412)
New Member
RE: Useful Tools & Materials For 3D Printing

Zbrush, mudbox, substance painter, 3d coat, blender

I personally prefer substance, but you can achieve finalised textures in pretty much any of them.

Substance painter is a program especialidade at 3d painting. Zbrush, mudbox and 3dcoat are 3d sculpture softwares which also support painting, and blender is a 3d modeling software which also supports painting. It's up to you to choose based on your needs. Keep in mind that blender tools are limited compared to the others.

But you probably will want to make some minor tweaks on Photoshop anyways because it's just faster

Remember that you will almost always need to UV map your model, since this is the way game engines uses to work

Veröffentlicht : 11/10/2019 3:04 pm
cwbullet
(@cwbullet)
Mitglied
RE: Useful Tools & Materials For 3D Printing

@guy-k2

I use these because they fit the large bottles of alcohol that I buy and there is no need to pour.  

--------------------
Chuck H
3D Printer Review Blog

Veröffentlicht : 11/10/2019 4:23 pm
--
 --
(@)
Illustrious Member
RE: Useful Tools & Materials For 3D Printing

Finding the need for a sledge hammer... 

 

ps: not my hammer, I think I'll be needing a larger one.  

Diese r Beitrag wurde geändert Vor 5 years von --
Veröffentlicht : 11/10/2019 7:42 pm
cwbullet
(@cwbullet)
Mitglied
RE: Useful Tools & Materials For 3D Printing
Posted by: @tim-m30

Finding the need for a sledge hammer... 

 

ps: not my hammer, I think I'll be needing a larger one.  

Not big enough.  

--------------------
Chuck H
3D Printer Review Blog

Veröffentlicht : 11/10/2019 8:48 pm
johnsmith908412
(@johnsmith908412)
New Member
RE: Useful Tools & Materials For 3D Printing
Posted by: @tim-m30

Finding the need for a sledge hammer... 

 

ps: not my hammer, I think I'll be needing a larger one.  9apps cartoon hd

lol you defiantly need a big one

Veröffentlicht : 03/11/2019 9:54 pm
Teilen: