PrusaSlicer 2.0.0 - FINAL  

RE: PrusaSlicer 2.0.0 - FINAL

Hi, 

has this version, implemented the UNDO function ?

RE: PrusaSlicer 2.0.0 - FINAL

Posted by: Antimix

Hi, 

has this version, implemented the UNDO function ?

Not yet.

RE: PrusaSlicer 2.0.0 - FINAL

Posted by: Peter S.

Posted by: Antimix

Hi, 

has this version, implemented the UNDO function ?

Not yet.

 🙁 So I would call it "SEMI-FINAL" 😉 

RE: PrusaSlicer 2.0.0 - FINAL

I have a question on a new message I received in Prusa Slicer today.  What does the following message mean?  "A toolpath outside the print area was detected".   Does it mean a crash will happen or something?  I was able to save the Gcode ok, but I do not want to print it if it is guaranteed to crash during printing...

The item is an almost full build plate print, but I have already printed one copy with a Gcode I sliced in the old Slic3r PE and it printed fine with no issues.  I had to re-slice to print with Prusament PETG since it requires higher temperatures than what I was using and this message came up after slicing. 

Thank you.

RE: PrusaSlicer 2.0.0 - FINAL

It looks to me like the skirt is running outside the print area towards the front of the build area, and maybe a little on the back of the build area. For something this large, do you really need a skirt? Try turning the skirt off to see if you can clear the error, and then if that works decide if you really need the skirt.

RE: PrusaSlicer 2.0.0 - FINAL

Who do we talk to about issues with Prusa slicer 2 its install etc, etc, having issues with its installation and output?

Pete.

RE: PrusaSlicer 2.0.0 - FINAL

Here's one place the tool is outside the print area:

RE: PrusaSlicer 2.0.0 - FINAL

Pete - it installs, it works, what else is there?    

So specifically, what problems are you experiencing? 

RE: PrusaSlicer 2.0.0 - FINAL

Posted by: Tim

Pete - it installs, it works, what else is there?    

So specifically, what problems are you experiencing? 

 

RE: PrusaSlicer 2.0.0 - FINAL

First it does not show like all the other versions I've seen demos of, hard to tell what is the front or back on my Mac, and the print quality is pretty bad.. using the same profiles from s slic3r PE 141+

It meant to look like this correct?

RE: PrusaSlicer 2.0.0 - FINAL

The UI is a bit different than Slic3r PE since the code was rewritten in a different language.  But it operates mostly the same, with some controls moved to different spots to add utility (e.g., rotate is now in the part dialog and has a powerful graphical interface too, but is no longer a menu option). 

Print quality - at least as far as I can tell - is unchanged, and I've been using Plicer for a couple of months (beta on).  Not sure why you are using Slic3r profiles with it - but they should work well enough.  Though there seems to be a gcode import bug - but you're not describing that.

Anyway - unless you can be really specific it's going to be hard to help - "it doesn't work like I expect" isn't going to illicit much response.

RE: PrusaSlicer 2.0.0 - FINAL

Posted by: Sembazuru

It looks to me like the skirt is running outside the print area towards the front of the build area, and maybe a little on the back of the build area. For something this large, do you really need a skirt? Try turning the skirt off to see if you can clear the error, and then if that works decide if you really need the skirt.

Tim-M30/Sembazuru - You were right it was forward a bit so i moved it back and removed the skirt and it worked!  Thank you. 

The one I printed earlier had the skirt right on the edge of the build plate, but I am not going to tempt fate again... 

RE: PrusaSlicer 2.0.0 - FINAL

Peter - the custom profile you've loaded is the problem. Not the application.  Load the standard MK3S profile, with MMU, and you'll see this:

RE: PrusaSlicer 2.0.0 - FINAL

Ok thanks, that has fixed it..

Pete.

RE: PrusaSlicer 2.0.0 - FINAL

Trying to move object doesn’t seem to work for me.  In that holding “Shift” and clicking left mouse button doesn’t do incremental movement.  What am I doing incorrectly?  I can move object in axial direction, but no “snapping” to new position...

RE: PrusaSlicer 2.0.0 - FINAL

Adding the colour change into Prusaslicer was a great move....but at the expense of Smooth Variable Layer Height, right?

Or if it is still possible, how?

Thanks,

Texy

RE: PrusaSlicer 2.0.0 - FINAL

Posted by: Texy

Adding the colour change into Prusaslicer was a great move....but at the expense of Smooth Variable Layer Height, right?

Or if it is still possible, how?

Thanks,

Texy

I haven't tried, but I wouldn't expect them to be mutually exclusive. The smooth variable height is applied in the layout, before any slicing has happened. The color change is applied in the preview after slicing has happened to tag specific layers with a filament change (M600) code. Though, changing the layer heights might mess up the color tagging... I haven't tried. Sounds like an excellent experiment for you to try and report back to us with. 😉

RE: PrusaSlicer 2.0.0 - FINAL

Posted by: Sembazuru

Posted by: Texy

Adding the colour change into Prusaslicer was a great move....but at the expense of Smooth Variable Layer Height, right?

Or if it is still possible, how?

Thanks,

Texy

I haven't tried, but I wouldn't expect them to be mutually exclusive. The smooth variable height is applied in the layout, before any slicing has happened. The color change is applied in the preview after slicing has happened to tag specific layers with a filament change (M600) code. Though, changing the layer heights might mess up the color tagging... I haven't tried. Sounds like an excellent experiment for you to try and report back to us with. 😉

Ah - you are correct. For some reason, I thought it was done in the Layer view...looks like it should still be do-able.

Thanks,

Texy

RE: PrusaSlicer 2.0.0 - FINAL

Hi guays

can you help?

Uploading the object it looks like this

after slicing  this

seems slicing does not recognise some edges.