Avisos
Vaciar todo

Surface Finish Problems!  

  RSS
Robbo
(@robbo)
New Member
Surface Finish Problems!

Hi Guys,

I'm printing in PETG and have been getting banding and depressions on the external faces. Printing at 0.25mm

Any ideas what could be the issue?

Thanks

Respondido : 26/11/2020 10:55 am
Jimbo70
(@jimbo70)
Estimable Member
RE: Surface Finish Problems!

I have had similar problems. A better printer profile can help a lot.

I use "Pretty-Petg" and it makes my prints almost perfect.

https://prusaslicerprofiles.com/pretty-petg/?wpdmc=pretty

Respondido : 26/11/2020 2:25 pm
Robbo
(@robbo)
New Member
Topic starter answered:
RE: Surface Finish Problems!

Thanks for the tip, didn't realise these were available! I adjusted the speed settings in the end, copying the 0.15mm quaility profile settings to my 0.25mm custom profile. Definitely has made an improvement.

Respondido : 27/11/2020 9:54 am
Dan Rogers
(@dan-rogers)
Noble Member
RE: Surface Finish Problems!

@jimbo70

How to get it to download the .INI file from that URL?  My downloader blocks .INI files

Respondido : 01/12/2020 5:21 pm
Compartir: