Prusament Jet Black - very slight warping
Hi,
On Saturday I started to use the Prusament Jet Black PLA I recently ordered. The PLA looks fine, I just only have a really small issue I noticed - which is not bad at all, I'm just simply a perfectionist. 🙂
I noticed on small parts a very little warp. Actually, it's almost unnoticable; I can only see the line where the light is refracting on the bottom. (Example picture is below, the red line means the refraction line.)
I print with the basic settings; 215°C (first layer) and 210°C (other layers) nozzle temperatures with 60° bed temperature, and using smooth PEI sheet on my i3 MK3S. Previously I used the Silver PLA I received with my printer; I did not notice anything like this.
(One thing is true: the outside temperature yesterday went below 5°C...)
Do you have any tips/suggestions how can I improve this? (I did not notice problems with bigger parts, but before this, with the Silver PLA the smaller parts also didn't have any issue.)
Thanks for the help in advance.
BR,
Adam