Avisos
Vaciar todo

Odd stringing problem  

  RSS
delwilson6241@gmail.com
(@delwilson6241gmail-com)
Active Member
Odd stringing problem

I'm experiencing an odd apparent stringing problem; it appears that stopping the extrusion is lagging moving to a new location as the strings are initially full size and then cut off sharply.  See attached picture.

3mf file from Prusa Slicer also attached.

3D print

Respondido : 06/09/2022 9:29 pm
Diem
 Diem
(@diem)
Illustrious Member

Picture?

Most stringing, 95% plus, is damp filament.

Cheerio,

Respondido : 06/09/2022 10:26 pm
delwilson6241@gmail.com
(@delwilson6241gmail-com)
Active Member
Topic starter answered:
RE: Odd stringing problem

I live in a desert (Utah). It has been unusually hot and dry here this year. I have had my printer and used it extensively for over two years without stringing problems with Prusament PETG.  Humidity in my office is 45% today.

Respondido : 10/09/2022 10:43 pm
Diem
 Diem
(@diem)
Illustrious Member

Picture?

Cheerio,

Respondido : 10/09/2022 10:50 pm
Compartir: