MK3S+ is creaking during print
I bought my printer around 2021 or 2022. I bought it preassembled, and it always made a creaking noise since the first time I powered it on. I just recently powered it on after a long hiatus from printing, and the creaking is driving me nuts. I feel like the printer would be way quieter if I could just get rid of the creaking. Any ideas? It sounds like it’s coming from the extruder. Here is a video during printing.
The first thing to do in any of these minor-faults-when-running scenarios is carefully to run through basic maintenance and re-check - if the problem persists come back and we'll attempt to diagnose:
https://help.prusa3d.com/en/article/i3-printers-regular-maintenance_2072
https://help.prusa3d.com/guide/maintenance-tips_23200
Cheerio,