Notifications
Clear all

Has anyone printed with Igus 150-PF filament?  

  RSS
kjoiner
(@kjoiner)
New Member
Has anyone printed with Igus 150-PF filament?

Hello,

I saw a post from 2017 regarding Igus filament but nothing lately.  I have an MK3S+ and am considering printing some small bearings using Igus 150-PF filament.  These bearings will be for another application, not on the Prusa printer itself.  

Here is a link to the Igus site with information on this filament.

https://www.igus.com/product/12404?artNr=I150-PF-0175-0250

  It's expensive relative to PLA and PETG but it has a lot of good properties for bearings.

My questions a focused on the nozzle temp, bed temp etc. to see if there is anything I should be concerned about.

Thanks!

Kyle

 

Posted : 07/06/2022 5:49 pm
Artur5
(@artur5)
Reputable Member
RE:

A shop where sometimes I purchase filaments and spares has Tribo filaments on their catalog. 

Iglide i150-PF isn't there but they have the Iglidur i180-PF, which I suppose has similar properties and printing settings,

Here's the link:      https://filament2print.com/gb/tribo/681-tribo.html

 

Posted : 08/06/2022 9:27 am
kjoiner
(@kjoiner)
New Member
Topic starter answered:
RE: Has anyone printed with Igus 150-PF filament?

Hello,

I ordered a 250g spool of the i150-PF.  I'll test it out and let everyone know how it does. 

 

Kyle

 

Posted : 08/06/2022 5:07 pm
Artur5
(@artur5)
Reputable Member
RE:

Seems very expensive stuff to me, costing eight or ten times more than PLA !.

I suppose that if you really need those superlow friction properties it's worth it. 

This post was modified 2 years ago by Artur5
Posted : 08/06/2022 8:15 pm
agelababypo
(@agelababypo)
New Member
RE: Has anyone printed with Igus 150-PF filament?

can you tell me more info about it pls

paper.io 2  

Posted : 10/06/2022 6:44 am
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Has anyone printed with Igus 150-PF filament?

I printed plain bearings with I180 from Igus some time ago:

My temp settings:

no cooling, retraction 0.6, z-hop 0.2mm

wbr,

Karl

 

 

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 10/06/2022 7:46 pm
You liked
brucce tran
(@brucce-tran)
Active Member
RE: Has anyone printed with Igus 150-PF filament?

I believe this information will be useful to some people.

Penalty Shooters 2

Posted : 14/09/2022 2:58 am
maltvat
(@maltvat)
Member
RE: Has anyone printed with Igus 150-PF filament?

Does anyone have info on settings for the igus i150-PF?  I plan on using some and I was wondering if anyone has a good starting point for settings since there isn't a profile built into PrusaSlicer.

Posted : 25/08/2023 5:03 pm
jihandoe
(@jihandoe)
Active Member
RE: Has anyone printed with Igus 150-PF filament?

+1, I am also looking for

Posted : 28/08/2023 1:30 pm
Share: