Can we ask the printer to make a beep sound once printing is done?
 
Notifications
Clear all

Can we ask the printer to make a beep sound once printing is done?  

  RSS
prusanewuser
(@prusanewuser)
Prominent Member
Can we ask the printer to make a beep sound once printing is done?

Hi, I need to keep checking the print process as it is in another room. Is it possible to make the printer to produce a beep sound or a short melody once it has done printing?

Napsal : 15/05/2020 6:45 pm
Agkirk
(@agkirk)
Estimable Member
RE: Can we ask the printer to make a beep sound once printing is done?

The answer is yes.  You will need to add statements to the g-code.  I have never done this so do not which statements are needed.

Napsal : 15/05/2020 7:11 pm
bobstro
(@bobstro)
Illustrious Member
RE: Can we ask the printer to make a beep sound once printing is done?

There's an old thread on this. I personally hate loud beeps, but insert little chirps at various times during the print by adding this line to start and end gcode under Printer Settings->Custom g-code:

M300 S40 P10 ; chirp

My notes and disclaimers on 3D printing

and miscellaneous other tech projects
He is intelligent, but not experienced. His pattern indicates two dimensional thinking. -- Spock in Star Trek: The Wrath of Khan

Napsal : 15/05/2020 7:25 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Can we ask the printer to make a beep sound once printing is done?
Posted by: @peter-c20

Hi, I need to keep checking the print process as it is in another room. Is it possible to make the printer to produce a beep sound or a short melody once it has done printing?

I'm using this simply sequence at the gcode end section:

M300 S1000 P500 ;First beep
M300 S0 P500 ;Wait
M300 S1000 P1000 ;Second beep
M300 S0 P500 ;Wait
M300 S1000 P1500 ;Third beep

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Napsal : 15/05/2020 9:40 pm
Alex Lethi, Dave J, a 1 lidem se líbí
Josef Möllers
(@josef-mollers)
Active Member
RE: Can we ask the printer to make a beep sound once printing is done?

Hi,

Can this be configured to be included in all gcode files created by PrusaSlicer?

Thanks,

Josef

Napsal : 04/07/2022 1:50 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
RE: Can we ask the printer to make a beep sound once printing is done?

if you add the gcode to the Custom Gcode, End Gcode and save the profile, you  can re use it as often as you like. 
regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Napsal : 04/07/2022 6:02 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Can we ask the printer to make a beep sound once printing is done?

set PS to expertmode:

..and add the gcode to the "End G-code" section.

wbr,

Karl

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Napsal : 04/07/2022 6:29 pm
Ty se líbí
Share: