Notifications
Clear all
Second layer shifted lightly left of first layer
I've recently assembled my MK3S and it pretty pretty much flawlessly, outside of an issue where the second layer is shifted left of the first layer by about the nozzle width. It does this consistently and with no other shifted layers at all.
Has anyone ever seen anything like this before?
Napsal : 18/05/2019 10:48 pm
Topic starter
answered:
RE: Second layer shifted lightly left of first layer
So this turned out to be a slightly loose screw on the x-axis stepper motor which allowed a very small amount of play. Odd it only impacted a single layer, but checking the screws did seem to fix this issue. Feel a bit stupid now.
Napsal : 19/05/2019 5:12 pm