Problems printing
I had absolutely no problems for half a year, but now I for sure have - and I simply don't know what to try
First I thought it was my nozzle, so I changed it. But I still have problems... Cant get the printer to work as it used to do (I think it's under extruding, but not sure)
I have attached some videos and pictures of the first layer calibration video is to big, so i have made an dropbox link https://www.dropbox.com/transfer/AAAAADnGutDN7qeLGCsWrPEdGDO59DI3c-54az3XmGu9YnexVA5FRLc
Best Answer by CMurph:
Had similar issues with first layer cal. I printed the gCode from here ( https://forum.prusa3d.com/forum/original-prusa-i3-mk3s-mk3-assembly-and-first-prints-troubleshooting/life-adjust-z-my-way/ ) and cleaned the bed with soap and a scrubber. Printer is back in action better than ever!
RE: Problems printing
First layer looks to high.
You give no info?
Movie not enough info!
Info?
RE: Problems printing
Had similar issues with first layer cal. I printed the gCode from here ( https://forum.prusa3d.com/forum/original-prusa-i3-mk3s-mk3-assembly-and-first-prints-troubleshooting/life-adjust-z-my-way/ ) and cleaned the bed with soap and a scrubber. Printer is back in action better than ever!
RE: Problems printing
Had similar issues with first layer cal. I printed the gCode from here ( https://forum.prusa3d.com/forum/original-prusa-i3-mk3s-mk3-assembly-and-first-prints-troubleshooting/life-adjust-z-my-way/ ) and cleaned the bed with soap and a scrubber. Printer is back in action better than ever!
RE: Problems printing
@chrisaaronmurphy
Thanks - You were totally right. I thought the problem came from the extruder, but after a cleaning with soap and sponge, and a new first layer calibration, everything runs like a dream 🙂
RE: Problems printing