Español
Foros
English forum
Original Prusa i3 MK3 & MK3S & MK3S+
Assembly and first prints troubleshooting
MK3S+ second layer issue
 
Avisos
Vaciar todo

MK3S+ second layer issue  

    Último Mensaje
  RSS
PS
 PS
(@ps)
Active Member
MK3S+ second layer issue

Hi all,

all my test prints fail at the second layer. I am printing the provided Prusa logo test file on the flash card with Prusa PLA filament. Any idea why this is occurring and how I can fix it? It might be something temperature related.

Here's a video of my most recent print:

Thanks,

Paul

Respondido : 15/01/2021 1:27 pm
PS
 PS
(@ps)
Active Member
Topic starter answered:
RE: MK3S+ second layer issue

Image of the first layer (which seems fine):

 

Image of the second layer:

Respondido : 15/01/2021 4:55 pm
Diem
 Diem
(@diem)
Illustrious Member
RE: MK3S+ second layer issue

@ps-3

Your first layer Z is too high, it should *just* squish the plastic enough to become a continuous sheet.

With many semi-seperate threads as you have some are bound to be picked up in the second pass causing the problems you are seeing.

Cheerio,

Respondido : 15/01/2021 5:34 pm
PS me gusta
PS
 PS
(@ps)
Active Member
Topic starter answered:
RE: MK3S+ second layer issue

@diem

Thanks for the feedback. I'll keep trying to get to the correct value 🙂

Respondido : 15/01/2021 11:33 pm
  Todos los debates del foro
  Anterior debate
Siguiente debate  
Debates relacionados
Etiquetas del debate:  MK 3S (12), second layer (5), PLA problems (9),
Compartir: