Benachrichtigungen
Alles löschen
MK3S+ second layer issue
Hi all,
all my test prints fail at the second layer. I am printing the provided Prusa logo test file on the flash card with Prusa PLA filament. Any idea why this is occurring and how I can fix it? It might be something temperature related.
Here's a video of my most recent print:
Thanks,
Paul
Veröffentlicht : 15/01/2021 1:27 pm
Themenstarter answered:
RE: MK3S+ second layer issue
Image of the first layer (which seems fine):
Image of the second layer:
Veröffentlicht : 15/01/2021 4:55 pm
RE: MK3S+ second layer issue
@ps-3
Your first layer Z is too high, it should *just* squish the plastic enough to become a continuous sheet.
With many semi-seperate threads as you have some are bound to be picked up in the second pass causing the problems you are seeing.
Cheerio,
Veröffentlicht : 15/01/2021 5:34 pm
PS gefällt das
Themenstarter answered:
RE: MK3S+ second layer issue
@diem
Thanks for the feedback. I'll keep trying to get to the correct value 🙂
Veröffentlicht : 15/01/2021 11:33 pm