Notifications
Clear all

Auto load filament?  

  RSS
lonelymonk
(@lonelymonk)
Eminent Member
Auto load filament?

first layer test.....   Nothing is coming out of the extruder...

Auto Feed Filament - does that mean I gently push the filament into the gears and they grab the filament and feed it into the extruder? I am nervous about "forcing" the filament ....

I've read everything I can find and this look like the right answer...  What do you think?

https://help.prusa3d.com/en/article/filament-not-loading_2014

Posted : 07/11/2020 2:58 am
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Auto load filament?
Posted by: @lonelymonkdeck

first layer test.....   Nothing is coming out of the extruder...

Auto Feed Filament - does that mean I gently push the filament into the gears and they grab the filament and feed it into the extruder? I am nervous about "forcing" the filament ....

I've read everything I can find and this look like the right answer...  What do you think?

https://help.prusa3d.com/en/article/filament-not-loading_2014

Here are also listed some possibilities to solve the problem:

https://help.prusa3d.com/en/article/clogged-nozzle-hotend-mk3s-mk2-5s_2008

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 07/11/2020 1:45 pm
Share: