Avisos
Vaciar todo
first print fail
can someone please help me troubleshoot this? not sticking to bed. what would be causing this?
Respondido : 26/05/2023 6:44 am
RE: first print fail
you're way to far off the print bed try to clean the bed with ipa and do the FLC
Respondido : 29/05/2023 9:51 am
Your first layer 'Z' calibration is too high, not enough squish. There are visible smears on your print sheet, clean it.
Cheerio,
Respondido : 29/05/2023 12:04 pm