Notifications
Clear all

printing problem at 0.1mm PLA  

Strona 2 / 2
  RSS
JeffJordan
(@jeffjordan)
Member Moderator
Re: printing problem at 0.1mm PLA

sliced with simplify3d and joseph prusa's settings (Original Prusa i3 MK2 RC04) at 0.1mm detail. just increased the infill from 10% to 15%.
took 57 minutes to print in silent mode.

dem inscheniör is' nix zu schwör...

Opublikowany : 25/01/2017 7:17 pm
Davide
(@davide-2)
Active Member
Topic starter answered:
Re: printing problem at 0.1mm PLA

I think carsten has hit the problem, I have always had problems of curling in other prints. The nozzle is new as the printer, I tried to decrease the flow of the extruder, the defect is reduced but remains empty space between the perimeters. I'll do some more tests, thanks

Opublikowany : 25/01/2017 10:02 pm
Davide
(@davide-2)
Active Member
Topic starter answered:
Re: printing problem at 0.1mm PLA

same settings, only changed the brand of filament 😯

Opublikowany : 09/03/2017 11:58 pm
william.t2
(@william-t2)
Active Member
Re: printing problem at 0.1mm PLA

Damn that looks better 😯

Opublikowany : 10/03/2017 4:41 pm
Strona 2 / 2
Share: