Notifications
Clear all
Page 2 / 2
Précédent
Re: printing problem at 0.1mm PLA
sliced with simplify3d and joseph prusa's settings (Original Prusa i3 MK2 RC04) at 0.1mm detail. just increased the infill from 10% to 15%.
took 57 minutes to print in silent mode.
dem inscheniör is' nix zu schwör...
Publié : 25/01/2017 7:17 pm
Topic starter
answered:
Re: printing problem at 0.1mm PLA
I think carsten has hit the problem, I have always had problems of curling in other prints. The nozzle is new as the printer, I tried to decrease the flow of the extruder, the defect is reduced but remains empty space between the perimeters. I'll do some more tests, thanks
Publié : 25/01/2017 10:02 pm
Topic starter
answered:
Re: printing problem at 0.1mm PLA
same settings, only changed the brand of filament 😯
Publié : 09/03/2017 11:58 pm
Re: printing problem at 0.1mm PLA
Damn that looks better 😯
Publié : 10/03/2017 4:41 pm
Page 2 / 2
Précédent