Polski
Fora
English forum
Original Prusa i3 MK2/S
Others (Archive)
Part lifting from bed during printing
 
Notifications
Clear all

Part lifting from bed during printing  

    Ostatni Post
  RSS
Ty
 Ty
(@ty)
Active Member
Part lifting from bed during printing

I bought my printer last December and received it in March May time frame. I have never be able to resolve this issue from the start.

The left side of the bed seems to be un-level but don't know how to fix that. I thought the auto leveling program was suppose to prevent this. Any help would be appreciated.

Thanks,

Opublikowany : 03/01/2018 8:29 pm
Ty
 Ty
(@ty)
Active Member
Topic starter answered:
Re: Part lifting from bed during printing

https://shop.prusa3d.com/forum/original-prusa-i3-mk2-f23/pla-lifting-problem--t1687.html

Just saw this thread. The suggestions there are hotter bed temperature on first few layers and and use a brim.

I'll give these a try and report back.

I'm printing with PLA and using a standard alcohol swab packet before every print.

Opublikowany : 03/01/2018 8:38 pm
Ty
 Ty
(@ty)
Active Member
Topic starter answered:
Re: Part lifting from bed during printing

I use members mark alcohol swabs similar to these.

http://a.co/7wqHNkb

Opublikowany : 03/01/2018 9:21 pm
Ty
 Ty
(@ty)
Active Member
Topic starter answered:
Re: Part lifting from bed during printing

Downloaded X-ray's fff profile for pla for my simply3d software which also increased my bed temperature from 50 to 55. Added a connected brim of 5 lines. Added a cooling profile to where after 10 layers it's at 100%. 2nd layer starts at 25 %

This seems to have fixed it.

Thanks everyone!!!!

Opublikowany : 03/01/2018 11:17 pm
  All forum topics
  Previous Topic
Next Topic  
Share: