Part lifting from bed during printing
I bought my printer last December and received it in March May time frame. I have never be able to resolve this issue from the start.
The left side of the bed seems to be un-level but don't know how to fix that. I thought the auto leveling program was suppose to prevent this. Any help would be appreciated.
Thanks,
Re: Part lifting from bed during printing
https://shop.prusa3d.com/forum/original-prusa-i3-mk2-f23/pla-lifting-problem--t1687.html
Just saw this thread. The suggestions there are hotter bed temperature on first few layers and and use a brim.
I'll give these a try and report back.
I'm printing with PLA and using a standard alcohol swab packet before every print.
Re: Part lifting from bed during printing
I use members mark alcohol swabs similar to these.
Re: Part lifting from bed during printing
Downloaded X-ray's fff profile for pla for my simply3d software which also increased my bed temperature from 50 to 55. Added a connected brim of 5 lines. Added a cooling profile to where after 10 layers it's at 100%. 2nd layer starts at 25 %
This seems to have fixed it.
Thanks everyone!!!!