Original Prusa i3 MK2S
Hey, I am having a problem with my printer ever since I have flashed the new 3.1.0 firmware for the Prusa i3 MK2S. When preheating up the hotend to begin a print, I am running into the problem of the printer running in a continuous loop of temperatures. When heating it up fro PLA, the printer gets to a high of 202 degrees Celsius and then drops in temperature to 198 degrees Celsius. It continues to do this forever, never reaching the optimum temperature of 210 for printing PLA. I am not sure what to do at this point. Oddly enough, when I change the printer to preheat to ABS, the printer surpasses 210 degrees and then I can change it back to printing PLA, but then while printing the extruder won't be hot enough because the printer will drop back down to its eternal loop of death.