Spool Placement  

Re: Spool Placement

Hi, placed mine left and right to the printer, about half way back. no issues with that by now.

Christian

Can you post a picture?

Thanks,

--Colin

Re: Spool Placement

Good day to all

When I prepared my Ikea "hack" enclosure, I made sure there would be enough space to hold the spools and all MM related stuff.

Basically the enclosure is 70x70x70 cm, with 4 nice deep compartments below for all the things we use.

I used 4 Ikea Kallax modules, where the 2 top ones the provided dividers where simply not assembled.

I know the price range of this hack is way above the LACK tables, but, it way sturdier and practical

Spool holders will be placed behind the printer on a slightly elevated plane (still to be installed), made with one of the left over dividers.

Best regards

Re: Spool Placement

Good day to all

When I prepared my Ikea "hack" enclosure, I made sure there would be enough space to hold the spools and all MM related stuff.

Basically the enclosure is 70x70x70 cm, with 4 nice deep compartments below for all the things we use.

I used 4 Ikea Kallax modules, where the 2 top ones the provided dividers where simply not assembled.

I know the price range of this hack is way above the LACK tables, but, it way sturdier and practical

Spool holders will be placed behind the printer on a slightly elevated plane (still to be installed), made with one of the left over dividers.

Best regards

I Just Love this idea, on my way to Ikea to buy one thanks for sharing

Re: Spool Placement

Hi to all

This is how it is currently sitting:

Due to work obligations it will sit like this for another month or so, hopefully, by the time I get back to my toys the MM upgrade will have arrived. I will try to get some more photos.

Best regards to all