Notifications
Clear all

Replacement bearings recommendation  

Stránka 9 / 9
  RSS
yang
 yang
(@yang)
New Member
RE: Replacement bearings recommendation

I have a Chinese bearing supplier whose bearings are very good. http://www.deep-grooveballbearing.com/

Napsal : 31/12/2019 3:05 am
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Replacement bearings recommendation

@omikron

I agree. Rather work with good quality than trouble with cheap goods. I only use SKF bearings on all my machines.
I am glad that there are still quality products to buy. You won't notice the difference until you try it.

Happy new year!

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Napsal : 31/12/2019 4:38 pm
cooldude
(@cooldude)
Active Member
RE: Replacement bearings recommendation

I am looking to replace bearings and rods on my new MK3s kit..Can i use LUMN-8?

Napsal : 08/05/2020 6:28 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Replacement bearings recommendation

@amodak2014

I do not know the type "LUMN-8". Would you put a link to these linear bearings?

The correct dimensions to the bearings would be:
Outer diameter 15mm
Inside diameter 8mm
length 24mm

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Napsal : 08/05/2020 8:09 pm
cooldude
(@cooldude)
Active Member
RE: Replacement bearings recommendation

https://us.misumi-ec.com/vona2/detail/110300026540/?HissuCode=LMU-N8

Napsal : 08/05/2020 8:13 pm
cooldude
(@cooldude)
Active Member
RE: Replacement bearings recommendation

I think these are same as LUM8 but without the seal

Napsal : 08/05/2020 8:14 pm
Stránka 9 / 9
Share: