Notifiche
Cancella tutti
Error: Preheat nozzle
We have a Prusa i3 MK2S at our university that hasn't been used for years. Now I've reactivated it. I updated the firmware to 3.2.3 and made my first attempts with it. I haven't had any good results yet and thought it was the old filament. I removed it and wanted to insert a new filament and got the following error:
Error: Preheat nozzle (Fehler: Duese Voermaermen)
The self-test runs without errors.
What could be the reason? And how can I fix it?
Thank you for your helpful advice!
Postato : 02/02/2024 8:22 am
RE:
You must preheat the nozzle to at least 180 °C. Previously, 130 °C was sufficient.
Postato : 03/02/2024 7:46 am
Andreas Sokol hanno apprezzato
RE: Error: Preheat nozzle
Settings -> Temperature -> Nozzle = 180 °C or more.
Postato : 03/02/2024 8:59 am
Andreas Sokol hanno apprezzato
Topic starter
answered:
RE: Error: Preheat nozzle
Thanks a lot. It works fine.
Postato : 05/02/2024 9:27 am