Notifications
Clear all

Error: Preheat nozzle  

  RSS
Andreas Sokol
(@andreas-sokol)
Member
Error: Preheat nozzle

We have a Prusa i3 MK2S at our university that hasn't been used for years. Now I've reactivated it. I updated the firmware to 3.2.3 and made my first attempts with it. I haven't had any good results yet and thought it was the old filament. I removed it and wanted to insert a new filament and got the following error:

Error: Preheat nozzle (Fehler: Duese Voermaermen)

The self-test runs without errors.
What could be the reason? And how can I fix it?

Thank you for your helpful advice!

Posted : 02/02/2024 8:22 am
miroslav.h4
(@miroslav-h4)
Honorable Member
RE:

You must preheat the nozzle to at least 180 °C. Previously, 130 °C was sufficient.

Posted : 03/02/2024 7:46 am
miroslav.h4
(@miroslav-h4)
Honorable Member
RE: Error: Preheat nozzle

Settings -> Temperature -> Nozzle = 180 °C or more.

Posted : 03/02/2024 8:59 am
Andreas Sokol
(@andreas-sokol)
Member
Topic starter answered:
RE: Error: Preheat nozzle

Thanks a lot. It works fine.

Posted : 05/02/2024 9:27 am
Share: