Lcd Screen having issue
As you can see in the picture bellow the lcd on my new mk2 is displaying gibberish when i power up the printer but the text become normal after a couple of press on the knob
what could be causing that?
Re: Lcd Screen having issue
Another Issue :
But this is maybe not an LCD problem, it looks like an firmware-bug ! I didn't print 43km of filament in 1 day 7 hours 😯
Thomas
Re: Lcd Screen having issue
what could be causing that?
➡
the lcd module doesn't recognise the first (power up) reset, which should be generated by the rambo.
i guess that you could "descramble" your garbage screen (after powering the printer up) easily with pushing the reset button at the front.
regarding your 2nd issue: yes, this is a (known) firmware bug ! seems to be fixed at the 3.0.10 (just checked the 3.0.10-alpha2 here).
guess the new fw will be released soon... the 3.0.10-RC1 seems to be in the pipeline for about 6 hours 
.
dem inscheniör is' nix zu schwör...