Notifications
Clear all
New 2.5 upgrade kit, very fine threads between objects
I finally have gotten my 2.5 kit assembled(thank you prusa). I've noticed that when printing PLA, I'm constantly leaking filament and I think this is causing minor threading. I'm using the new slic3r configured for the 2.5 and I didn't have this issue with my 2s. All settings are defaults at current time.
Posted : 07/08/2018 8:49 pm
Topic starter
answered:
Re: New 2.5 upgrade kit, very fine threads between objects
Oh, and by threads, these are very fine, like cobwebs.
Posted : 08/08/2018 3:59 am
Re: New 2.5 upgrade kit, very fine threads between objects
I also have significant stringing on my MK2.5 that wasn't present before the upgrade from my MK2S. Slic3r PE default presets. I used to simply lower the z-hop to .2 and this would pretty much stop all stringing on the MK2S. But my 2.5 prints have cobwebs like crazy with these settings.
Posted : 14/08/2018 5:19 pm