Notifications
Clear all
PrusaSlicer-infill?
the infill @30% seems weak with my objects. I compress pretty easily. Can the walls of the infill be increased to be stronger with another setting like an infill multiplier value or infill wall value?
Opublikowany : 16/01/2023 5:10 pm
RE: PrusaSlicer-infill?
You will get much better strength by increasing perimeters from 2 to 3 or 4.
Opublikowany : 16/01/2023 5:12 pm
Topic starter
answered:
RE: PrusaSlicer-infill?
Aah great thankx very much👍
You will get much better strength by increasing perimeters from 2 to 3 or 4.
Opublikowany : 16/01/2023 5:14 pm