Notifications
Clear all

Self Calibration  

  RSS
DW29a
(@dw29a)
New Member
Self Calibration

I'm just getting around to getting this up and running. My life has been, well...lively, since purchasing it.

So, my problem is with self calibration. It won't do it.

The bed moves back further than the nozzle. So, when the nozzle goes down to the bed, it completely misses and goes straight to the stops, where it begins to complain and, ultimately, fails.

Is there anything I can do to fix this?

Publié : 06/03/2019 7:51 pm
JoanTabb
(@joantabb)
Veteran Member Moderator
Re: Self Calibration

unusual situation, any chance of some pictures showing your printer configuration?

regards Joan

I try to make safe suggestions,You should understand the context and ensure you are happy that they are safe before attempting to apply my suggestions, what you do, is YOUR responsibility. Location Halifax UK

Publié : 06/03/2019 10:17 pm
DW29a
(@dw29a)
New Member
Topic starter answered:
Re: Self Calibration

I would be happy to put a video in the thread, when I can get it off my phone and on somewhere decent. LOL

Publié : 06/03/2019 10:34 pm
DW29a
(@dw29a)
New Member
Topic starter answered:
Re: Self Calibration

Any suggestions or is this thing just completely hosed?

Publié : 08/03/2019 3:57 pm
--
 --
(@)
Illustrious Member
Re: Self Calibration

It looks like you assembled the printer incorrectly. The longer Y-Axis section of the screws should be on the front of the printer, not the back.

Publié : 08/03/2019 7:10 pm
richard.l
(@richard-l)
Membre Moderator
Re: Self Calibration

Good catch Tim. I completely missed that when examining the picture.

Publié : 08/03/2019 8:00 pm
DW29a
(@dw29a)
New Member
Topic starter answered:
Re: Self Calibration

Tim caught what I missed.

I've moved a bunch of things around this morning and things seem to be working now.

I'm, at least, past the self calibration test. Now, on to the next thing.....

There's always something. 🙂

Thanks,

Publié : 08/03/2019 9:20 pm
Partager :