Notifications
Clear all

Unofficial Prusa XL Waiting Thread  

Strona 31 / 39
  RSS
DarkTeck
(@darkteck)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

Sad to say I got my email today for another preorder I had for an XL single tool model . After the last 4 weeks of battling with my Multi tool version I got , I have cancelled this order . After the multiple issues I have had and working with support only to find it was pre assembled components that have been giving me issues from cross threaded screws , the 3D printed parts having burrs in them causing filament drag , random layers , over extruding , real bad blistering for no reason . ( I know what your thinking , moist filament ? No .. the XL is in a workshop with 17 other Prusa Machines and those same filament rolls were used on the MK3 and MK4 and it printed perfectly.)

I’m hoping after some more back and forth with them I can get this machine functional as intended and put into print farm rotation, but right now my other pre-Orders are being cancelled . Hopefully this will free up a couple orders for those you still waiting and I hope you have much better experience .

My only advice will be CHECK the machine over completely before usage , any factory assembled parts fully examine them . 

Opublikowany : 22/08/2023 2:10 am
ludodg
(@ludodg)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

 

Posted by: @darkteck

Sad to say I got my email today for another preorder I had for an XL single tool model . After the last 4 weeks of battling with my Multi tool version I got , I have cancelled this order . After the multiple issues I have had and working with support only to find it was pre assembled components that have been giving me issues from cross threaded screws , the 3D printed parts having burrs in them causing filament drag , random layers , over extruding , real bad blistering for no reason . ( I know what your thinking , moist filament ? No .. the XL is in a workshop with 17 other Prusa Machines and those same filament rolls were used on the MK3 and MK4 and it printed perfectly.)

I’m hoping after some more back and forth with them I can get this machine functional as intended and put into print farm rotation, but right now my other pre-Orders are being cancelled . Hopefully this will free up a couple orders for those you still waiting and I hope you have much better experience .

My only advice will be CHECK the machine over completely before usage , any factory assembled parts fully examine them . 

Sad to hear … and strange.

one of the reasons why people choose prusa-material is exactly the knowledge that the equipment is solid and thrustworthy.

it seems the rush of getting all those printers shipped asap, is influencing the quality.
i have no doubt that you know what you are talking about. With a printfarm and multiple prusa-printers as your tools, you have gotten familiar withthe usual prusa-quality.

i hope it get’s fixed asap.

 

 

Opublikowany : 22/08/2023 6:21 am
Aquaerics polubić
bolsoncerrado
(@bolsoncerrado)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

Lemme reword that:

Posted by: @ludodg

 

Posted by: @darkteck

Sad to say I got my email today for another preorder I had for an XL single tool model . After the last 4 weeks of battling with my Multi tool version I got , I have cancelled this order . After the multiple issues I have had and working with support only to find it was pre assembled components that have been giving me issues from cross threaded screws , the 3D printed parts having burrs in them causing filament drag , random layers , over extruding , real bad blistering for no reason . ( I know what your thinking , moist filament ? No .. the XL is in a workshop with 17 other Prusa Machines and those same filament rolls were used on the MK3 and MK4 and it printed perfectly.)

I’m hoping after some more back and forth with them I can get this machine functional as intended and put into print farm rotation, but right now my other pre-Orders are being cancelled . Hopefully this will free up a couple orders for those you still waiting and I hope you have much better experience .

My only advice will be CHECK the machine over completely before usage , any factory assembled parts fully examine them . 

Sad to hear … and strange.

one of the reasons why people choose prusa-material is exactly the knowledge that the equipment is solid and thrustworthy.

it seems the rush of getting all those printers shipped asap, is influencing the quality.
i have no doubt that you know what you are talking about. With a printfarm and multiple prusa-printers as your tools, you have gotten familiar withthe usual prusa-quality.

i hope it get’s fixed asap.

 

 

one of the reasons why people choose prusa-material WAS EXACTLY the knowledge that the equipment WAS solid and thrustworthy.

 

Can't agree more with the rest... Rush is killing the brand... I'm sorry for them. China competition is fierce and mercyless.

 

 

 

Opublikowany : 22/08/2023 7:45 am
bolsoncerrado
(@bolsoncerrado)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

On the other side, my 1 head semiassembled is due today... but im starting holidays so i guess it wont be until september till i check it 🙁

 

Opublikowany : 22/08/2023 7:47 am
ludodg
(@ludodg)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

 

Posted by: @bolsoncerrado

On the other side, my 1 head semiassembled is due today... but im starting holidays so i guess it wont be until september till i check it 🙁

 

SO that's fabulous news!
You are having a fine holiday ... AND the knowledge that  something is waiting for you on your return 😀

Opublikowany : 22/08/2023 8:42 am
bolsoncerrado polubić
ludodg
(@ludodg)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

 

Posted by: @bolsoncerrado

On the other side, my 1 head semiassembled is due today... but im starting holidays so i guess it wont be until september till i check it 🙁

 

SO that's fabulous news!
You are having a fine holliday ... AND the knowledge that  something is waiting for you on your return 😀

Opublikowany : 22/08/2023 8:42 am
bolsoncerrado
(@bolsoncerrado)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

Now that we're at it, since the MK4 shares the nextruder, everyone that has tested the XL with a few prints so far, have you had any issues yet with your filament sensor OR you haven't had  any spool run out yet?

https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/3129

I'm worried no one from Prusa has chimmed in yet...

 

Opublikowany : 22/08/2023 8:47 am
Peter Main
(@peter-main)
Eminent Member
Contacted Chat

Nothing really new.  I checked on my order and it's still in the queue.  She said "we have recently begun switching preorders...you should get an email soon."

I said: "We've been told 'soon' for months now. Is 'soon' days, weeks, or months?"

Reply was: "We are working towards it not being more than a few weeks."

Not particulary promissing nor enlightening.

I did add: "OK, thanks.  I suppose I don’t need to tell you just how frustrated we XL pre-order Prusa fans are getting."  I suspect Support is as tired of people asking "when?" as we are of waiting.

F.Y.I. My order is for a semi-assembled dual-head XL, ordered about 3 hours after pre-orders opened on 18-Nov (#16372473xx)

Opublikowany : 22/08/2023 10:03 am
Acht
 Acht
(@acht)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

 

Posted by: @peter-main

Nothing really new.  I checked on my order and it's still in the queue.  She said "we have recently begun switching preorders...you should get an email soon."

I said: "We've been told 'soon' for months now. Is 'soon' days, weeks, or months?"

Reply was: "We are working towards it not being more than a few weeks."

Not particulary promissing nor enlightening.

I did add: "OK, thanks.  I suppose I don’t need to tell you just how frustrated we XL pre-order Prusa fans are getting."  I suspect Support is as tired of people asking "when?" as we are of waiting.

F.Y.I. My order is for a semi-assembled dual-head XL, ordered about 3 hours after pre-orders opened on 18-Nov (#16372473xx)

I am getting my semi-assembled dual-head XL today. I think it really shouldn't be that long for you then. Honestly when I preorded it I though to myself "Ohh boy this will take a while" and then came Corona and Supply issues everywhere, so in that regarding I think they handled it alright. It is a very ambitious project - especially the multi head part.

Of course what they will deliver needs to work.

Opublikowany : 22/08/2023 11:26 am
bolsoncerrado
(@bolsoncerrado)
Estimable Member
RE:

Ouuch!

 

 
This post was modified 1 year temu by bolsoncerrado
Opublikowany : 22/08/2023 11:27 am
DarkTeck i Georg polubić
MileHigh3Der
(@milehigh3der)
Honorable Member
RE: Unofficial Prusa XL Waiting Thread

OK, not your fault, but that really pisses me off.  Especially if they start shipping spare heads anytime soon.  That they have no idea when 5 head units will ship really is not cool.

Posted by: @erik-3

I was mistaken! I ordered a dual-head printer. They're shipping all the way to April orders on those.


I contacted support to ask about changing to a five tool head printer. I was told to just not complete the order until the option is available. They referred me to this article and said I'll have to wait until the five tool printers are shipping around my order date. I'll wait and see how long it takes.

 

Opublikowany : 23/08/2023 2:22 am
bolsoncerrado
(@bolsoncerrado)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

Yeah, not cool. That's the main issue. Overheating apparently. 

Opublikowany : 23/08/2023 3:43 am
Peter Main
(@peter-main)
Eminent Member
Woo hoo!

I just got my email and placed the order for a semi-assembled dual-head XL, ordered 3:56pm on 18-Nov.  Shipping to the UK is £50 (I've added some filament to the order).

Good luck to everyone who is still patiently waiting.

 

Opublikowany : 23/08/2023 1:44 pm
Aquaerics
(@aquaerics)
Member
RE:

I got my E-Mail for a semi-assembled dual head XL, ordered Nov 18, 2021, 4:15:07 PM. Payment is placed. So we will see how long it takes to deliver.
No i have to make some space for the printer 🙂

Opublikowany : 24/08/2023 6:41 am
Acht, Georg i TechnoSwiss polubić
Acht
 Acht
(@acht)
Estimable Member
RE: Unofficial Prusa XL Waiting Thread

Same Boat, but a Week ago.
For me it they took 5 days to ship it. I also ordered some other stuff, like filament and nozzles (and a hoody).

 

Opublikowany : 24/08/2023 7:44 am
Aquaerics polubić
Cashew92ftw
(@cashew92ftw)
Trusted Member
RE: Unofficial Prusa XL Waiting Thread

Well i pulled the trigger on canceling my order. This was due to lack of funds at this time as I now have 2 kids. 

 

I ordered on the 18th like most here, (2 head kit) and didnt receive my order confirmation email. Hopefully someone else gets to enjoy my spot though. 🙂

Orange Juice Please

Opublikowany : 28/08/2023 3:02 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

Priorities tend to change in 2 years.  

Posted by: @cashew92ftw

Well i pulled the trigger on canceling my order. This was due to lack of funds at this time as I now have 2 kids. 

 

I ordered on the 18th like most here, (2 head kit) and didnt receive my order confirmation email. Hopefully someone else gets to enjoy my spot though. 🙂

 

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 28/08/2023 4:55 pm
MileHigh3Der
(@milehigh3der)
Honorable Member
RE:

So the five head semi assembled have been shipping for three weeks and lesser units have been shipping for awhile.  Frankly, they must have a pretty big problem supplying heads because for single head units are shipping NOV 22 orders and dual head April 22 orders.

The five-tool semi-assembled printers are shipping already (shipping started in the week of August 7th). We are switching pre-orders placed on November 18th, 2021.

Meanwhile, Day 1 orders from other people languish.  

16372452xx

And I still haven’t heard anything at all.

At this point I’d risk private equity taking over the place if they’d put competent management in place.

This post was modified 1 year temu by MileHigh3Der
Opublikowany : 28/08/2023 8:32 pm
Peter Main
(@peter-main)
Eminent Member
Switching pre-orders to shipping time

I was emailed on the 23rd and immediately converted my pre-order (dual-semi #16372473xx).  Now, a week later, the order is still in "new" status.  I suspect they allowed a bunch of first day orders to be converted just to keep people quiet (and get the money in).  This is unlike CW's experience when they shipped his immediately (on August 4th).  I think that was so they could say they "began shipping dual-semi in the week of July 31st" as promissed. Maybe got 3 out the door.

Another theory I have is that they are doing the fully assembed first because they make so much more money on them.  My understanding is that someone who knows what they are doing can assemble as semi in 45 minutes.

Sigh, and here's me, I had been hoping I'd get a nice birthday present to myself back in May.  😥 

Opublikowany : 29/08/2023 8:21 am
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Unofficial Prusa XL Waiting Thread

I don't know how anyone could assemble it in 45 minutes.  It is a heck of a lot to do for 45 minutes.  

Posted by: @peter-main

I was emailed on the 23rd and immediately converted my pre-order (dual-semi #16372473xx).  Now, a week later, the order is still in "new" status.  I suspect they allowed a bunch of first day orders to be converted just to keep people quiet (and get the money in).  This is unlike CW's experience when they shipped his immediately (on August 4th).  I think that was so they could say they "began shipping dual-semi in the week of July 31st" as promissed. Maybe got 3 out the door.

Another theory I have is that they are doing the fully assembed first because they make so much more money on them.  My understanding is that someone who knows what they are doing can assemble as semi in 45 minutes.

Sigh, and here's me, I had been hoping I'd get a nice birthday present to myself back in May.  😥 

 

--------------------
Chuck H
3D Printer Review Blog

Opublikowany : 29/08/2023 9:07 am
Strona 31 / 39
Share: