Notifications
Clear all
Unable to print with input shaping despite having latest firmware and slicer
As you can see from the images below, I get a warning message that prevents me from printing a model with input shaper, even though I updated to the latest MK4 firmware and have the latest slicer. What am I doing wrong??
Best Answer by Tyler:
Had the same problem, then flased to the 5.0.0 alpha and it worked. here is the link
https://github.com/prusa3d/Prusa-Firmware-Buddy/releases/tag/v5.0.0-alpha3
Publié : 09/07/2023 4:01 pm
RE: Unable to print with input shaping despite having latest firmware and slicer
Are you using 4.7.0?
Publié : 09/07/2023 9:03 pm
RE: Unable to print with input shaping despite having latest firmware and slicer
Update the firmware to the Imput Shaper Alpha, its not enough that you have the "latest firmware" you need the imputshaper alpha firmware.
Publié : 09/07/2023 9:45 pm
RE: Unable to print with input shaping despite having latest firmware and slicer
Had the same problem, then flased to the 5.0.0 alpha and it worked. here is the link
https://github.com/prusa3d/Prusa-Firmware-Buddy/releases/tag/v5.0.0-alpha3
Publié : 09/07/2023 11:23 pm