Unable to print with input shaping despite having latest firmware and slicer
 
Notifications
Clear all

Unable to print with input shaping despite having latest firmware and slicer  

  RSS
Alex Bonson
(@alex-bonson)
Member
Unable to print with input shaping despite having latest firmware and slicer

As you can see from the images below, I get a warning message that prevents me from printing a model with input shaper, even though I updated to the latest MK4 firmware and have the latest slicer. What am I doing wrong??

 

 

Best Answer by Tyler:

Had the same problem, then flased to the 5.0.0 alpha and it worked. here is the link

https://github.com/prusa3d/Prusa-Firmware-Buddy/releases/tag/v5.0.0-alpha3

Napsal : 09/07/2023 4:01 pm
shledge
(@shledge)
Eminent Member
RE: Unable to print with input shaping despite having latest firmware and slicer

Are you using 4.7.0?

Napsal : 09/07/2023 9:03 pm
Stsfin
(@stsfin)
Active Member
RE: Unable to print with input shaping despite having latest firmware and slicer

Update the firmware to the Imput Shaper Alpha, its not enough that you have the "latest firmware" you need the imputshaper alpha firmware.

Napsal : 09/07/2023 9:45 pm
Tyler
(@tyler-5)
Member
RE: Unable to print with input shaping despite having latest firmware and slicer

Had the same problem, then flased to the 5.0.0 alpha and it worked. here is the link

https://github.com/prusa3d/Prusa-Firmware-Buddy/releases/tag/v5.0.0-alpha3

Napsal : 09/07/2023 11:23 pm
Share: