Waterproof printing in PETG
I wish to print watertight containers, so I bought a roll of PETG after reading that it was suitable per the Prusa product page description below
But my prints are not watertight and I can find no further information on the Prusament.com or here at Prusaprinters.org.
(FYI THIS the best info I've found about watertight 3D printing.)
I'll be grateful for any guidance. Thank you.
https://prusament.com/materials/prusament-petg/
Waterproof prints
Because of the very good layer adhesion, the PETG prints are suitable for waterproof applications.
RE: Waterproof printing in PETG
Please post the settings you've used and some more details what exactly you're trying to print.
Often linked posts:
Going small with MMU2
Real Multi Material
My prints on Instagram
RE: Waterproof printing in PETG
I printed some floats for a garden fountain using PETG Prusament.
Initially is was a "Titanic fountain" 🙁
I ended up with 5 perimeters and +5% extrusion and that worked fine.
Peter
Please note: I do not have any affiliation with Prusa Research. Any advices given are offered in good faith. It is your responsibility to ensure that by following my advice you do not suffer or cause injury, damage…