Avisos
Vaciar todo
O.8 mm Nozzle Print - Stringing and Thin Walls
Hey all,
I am trying to print the attached 3mf in bulk, but I am getting significant stringing and losing details due to nozzle size, I believe. Can anyone provide some guidance?
I have lowered the temperature, changed retraction distance and speed, but still getting pretty bad stringing.
I am thinking I may have to switch back to 0.4 mm nozzle for these prints.
Respondido : 03/05/2022 5:32 pm
Topic starter
answered:
RE: O.8 mm Nozzle Print - Stringing and Thin Walls
Not sure if the attachment was included?
Respondido : 03/05/2022 5:49 pm