Help with printing hollow tube on m,y Mini+
Hello Prusa community,
I can't remember the PrusaSlicer printer setting in order to print a hollow tube. Right now the bottom end of the tube has an endcap.
I would appreciate any help you would provide.
Thank you.
Sievers05
RE:
Hello Prusa community,
I can't remember the PrusaSlicer printer setting in order to print a hollow tube. Right now the bottom end of the tube has an endcap.
I would appreciate any help you would provide.
Thank you.
Sievers05
What exactly does the component look like. Could you upload an STL file?
wbr,
Karl
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
RE: Help with printing hollow tube on m,y Mini+
I managed to find the printer settings to print a hollow tube without a solid bottom endcap.
1. Go to layers and perimeters
2. Set infill to 0%
3. Set bottom solid layer to 0.
4. Set top solid layer to 0.
That's it.
Cheers