why do this happen ?
hello
my prusa mini do this weird thing at the end of every print
the Z axis goes to 0 in the far left corner of the bed
the print is normal until the end
the printer is un modified exept for the bond tech extrudeur
and the estep 415 ( i think) file at each restart ( M92 E415M500)
can it be the wrong estep ?
thx
RE: why do this happen ?
Update your printers firmware. This is a known issue and there are several threads in the mini forums about it.
RE: why do this happen ?
Try omitting M500, so just "M92 E415". As far as I know, M500 is locked on the Mini.
https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/767
wbr,
Karl
Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.
RE: why do this happen ?
As Neophyl said, it's a version incompatibility between firmware and slicer software. Has been asked and answered a hundred times.
Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...