Notifications
Clear all

why do this happen ?  

  RSS
william
(@william-3)
New Member
why do this happen ?


hello 
my prusa mini do this weird thing at the end of every print 
the Z axis goes to 0 in the far left corner of the bed 
the print is normal until the end 
the printer is un modified exept for the bond tech extrudeur 
and the estep 415 ( i think)   file  at each restart (  M92 E415M500)

can it be the wrong estep ?

thx

 

Posted : 23/09/2022 6:44 pm
Neophyl
(@neophyl)
Illustrious Member
RE: why do this happen ?

Update your printers firmware.  This is a known issue and there are several threads in the mini forums about it.

Posted : 23/09/2022 7:24 pm
fuchsr liked
karl-herbert
(@karl-herbert)
Illustrious Member
RE: why do this happen ?

Try omitting M500, so just "M92 E415". As far as I know, M500 is locked on the Mini.

https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/767

wbr,

Karl

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 23/09/2022 7:37 pm
fuchsr
(@fuchsr)
Famed Member
RE: why do this happen ?

As Neophyl said, it's a version incompatibility between firmware and slicer software. Has been asked and answered a hundred times. 

Posted : 23/09/2022 9:21 pm
Share: