The e-steps fix in 4.0.5 RC firmware fixed my under-extrusion problems!!
 
Notifications
Clear all

The e-steps fix in 4.0.5 RC firmware fixed my under-extrusion problems!!  

  RSS
Cory West
(@cory-west)
Active Member
The e-steps fix in 4.0.5 RC firmware fixed my under-extrusion problems!!

I was having a really bad time with under-extrusion and it seems completely fixed with the e-steps change in 4.0.5 RC.  Thank you!!

Posted : 21/03/2020 5:01 am
Share: