Avisos
Vaciar todo
Prusa Mini Crash
Hello everyone,
I've had my Prusa Mini for almost 2 years without any problems, but recently, it's been experiencing frequent crashes. The screen displays an error message accompanied by a peculiar pitting sound. I've attached an image of the error screen for reference. My Prusa Mini is currently running on the latest version: Firmware 5.1.0, Bootloader 2.1.2.
I'd greatly appreciate any assistance or advice you can offer. Thank you in advance!
Best regards,
Respondido : 06/12/2023 1:08 pm
Topic starter
answered:
RE: Prusa Mini Crash
Customer support recommended me to upgrade my FW to the stable version 5.0 (I was in the Alpha). Just did it and I will let you know if it happens again.
Respondido : 06/12/2023 3:15 pm
RE: Prusa Mini Crash
From the picture, i see that you are using an alpha version of the firmware.
There is now an RC version which you can find here.
Respondido : 06/12/2023 3:47 pm