Avisos
Vaciar todo
printer head at end of print
My printer head stops at the left back corner at printing hight when print is finnished.
Never done that before. I have the latest slicer.
Why does this happends ?
Respondido : 22/10/2022 2:17 pm
RE: printer head at end of print
Update the mini firmware. This is a known incompatibility between firmware and slicer versions.
Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...
Respondido : 22/10/2022 2:56 pm
Topic starter
answered:
RE: printer head at end of print
What firmware update would you recomend ?
Respondido : 22/10/2022 3:35 pm
RE: printer head at end of print
The latest stable version (4.3.4 https://www.prusa3d.com/downloads/firmware/prusa3d_fw_4_3_4_MINI.zip)
Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...
Respondido : 22/10/2022 4:22 pm
Topic starter
answered:
RE: printer head at end of print
Thanks for your help.
Respondido : 22/10/2022 4:31 pm
Topic starter
answered:
RE: printer head at end of print
Problem solved 🙂
Respondido : 22/10/2022 5:57 pm