Long Filenames Don't Show on Print List in FW 4.0.5
 
Notifications
Clear all

Long Filenames Don't Show on Print List in FW 4.0.5  

  RSS
mark
 mark
(@mark)
Reputable Member
Long Filenames Don't Show on Print List in FW 4.0.5

It seems that long filenames do not show on the print list. If the USB drive is inserted and the long filename is the most recent, it selects it for printing, but it cannot be selected from the list.

Mark

 

Posted : 28/04/2020 3:24 am
Dhaya
(@dhaya)
Active Member
RE: Long Filenames Don't Show on Print List in FW 4.0.5

Hi, a similar issue has been reported on the Prusa Mini's firmware Github repository: https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/243.

Posted : 28/04/2020 9:08 am
mark
 mark
(@mark)
Reputable Member
Topic starter answered:
RE: Long Filenames Don't Show on Print List in FW 4.0.5
Posted by: @dhaya

Hi, a similar issue has been reported on the Prusa Mini's firmware Github repository: https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/243.

This link works, no period at the end.

https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/243

I'm not sure this is exactly the same issue, as I don't see the short names at all and the file can be printed if the drive is inserted and it is the latest file there, but it may be related.

Regards,

Mark

 

Posted : 28/04/2020 1:44 pm
Share: