MK3 Display shows USB when printing from PrusaLink
Tojik,
Thank you for all of your quick and excellent responses. As soon as a 28 hour print I am running is done I will load RC2 and attach my webcam to the RPI Zero 2 W.
I noticed that, while printing from Prusa Link, the MK3 LCD (with firmware 3.11-4955) shows USB and the percentage rather than WiFi or PL or Link or something else.
Will this require an MK3 firmware update or will this be fixed in a future Prusa Link Update?
RE:
This is expected. You can still find the IP address under main menu -> support, near the bottom. Also, the new version shows an arrow as the first character whenever PrusaLink is displaying stuff, to help distinguish between FW and other messages.
If you don't like what the newer version displays, please let me know what would you expect it to write instead.
RE: MK3 Display shows USB when printing from PrusaLink
I don't know how many characters are available but here are some suggestions for what to display on the MK3 LCD instead of USB:
Link
PrusaLink
P-Link
Wifi
Remote