my mini isn't printing on same location as prusaslicer is showing  

RE: my mini isn't printing on same location as prusaslicer is showing

Are you sure?  Is the steel sheet on straight..?

Cheerio,

RE: my mini isn't printing on same location as prusaslicer is showing

i guess so?

RE: my mini isn't printing on same location as prusaslicer is showing

Discussion already in the following forum entry:

https://forum.prusa3d.com/forum/assembly-and-first-prints-troubleshooting/heatbed-not-centered/#post-503305

Slicer

Have you selected the correct printer in the slicer? 

If you are printing from a file that someone made is the g-code set for your printer?

hhhhh

yes. correct printer selected in prusaslicer

i never use others gcode

Check end stops for X and Y axis

The Mini is resetting the axis by running the X and Y motors until they hit the end stop (end of axe). If there is something obstructing this movement and makes an early stop, the zero point of X and/or Y axis will be wrong for the print.

Please check if X and Y axis can move freely to the end stops.

I have had failed prints because the build plate hit something I had standing behind the printer and calibrated the end of Y axis wrong.

Slicer / end stops ok

I also only use self-sliced gcode.

X and Y axis work properly.