mk4s lcd display
Received a new assembled MK4S mmu3 and lcd screen is very glitchy and goes blank at startup anyone else have this problem
RE: mk4s lcd display
Ive had it glitch once, and restarted the printer. Havent seen it since TBH......
--> MK4 - MK4S - MINI+ - Accelerometer Guide - BambuLab A1 Combo <--
RE: mk4s lcd display
Check the cable from the control box to the back of the screen pcb is firmly in place at both ends
RE: mk4s lcd display
I had the same the first time I started a newly build printer. After a few restarts it was gone and did not came back. Using the printer for almost 30 day, daily. It is reliable now. Nevertheless is was a very unexplainable behaviour.
RE:
i have the same problem.
i ve check cable, connectique,lcd screen , with the prusa chat, and the solution (for the moment) was to reinstall the firmware with a good usb key