Change nozzle MK4S
Can anyone please point me in the direction of an updated video explaining how to change the nozzle for the mk4s using the printable tool.
Everything I can find is for older printers. I’d like a guide or solution that lets me switch the nozzle without having to dismantle the surrounding enclosure, remove fans etc.
RE: Change nozzle MK4S
https://help.prusa3d.com/guide/how-to-replace-the-prusa-nozzle-mk4s-mk3-9s_734750
Formerly known on this forum as @fuchsr -- until all hell broke loose with the forum software...
RE: Change nozzle MK4S
I have the MK4 (not the MK4S) and when I change nozzles I never disconnect the power cables. I just loosen the holding screws and unscrew the nozzle. And then rescrew the nozzle and tighten the holding screws. Takes like 20 seconds. I assume the same is possible with the MK4S!
RE: Change nozzle MK4S
Do you use the printable part mentioned in the link above?
RE: Change nozzle MK4S
Something like this is a big help too: https://www.amazon.de/gp/product/B092369RYR