Notifiche
Cancella tutti
MK4 Print Quality Issue
Recently, all my prints have been coming out terrible. I'm not sure how to describe the issue so I attached a few pictures along with the print files. Doing a full recalibration didn't help and everything passed. Any advise?
Printer: MK4
MMU3: Yes
Firmware Version: 6.0.1+14848
PrusaSlicer 2.7.4
Filament: Prusament PETG
Best Answer by JP Guitars:
Looks like mine prints if I have damp filament so probably worth trying drying it. And I've had brand new just opened filament that is damp
Questa discussione è stata modificata 5 months fa da Momo
Postato : 17/06/2024 7:05 pm
RE: MK4 Print Quality Issue
Looks like mine prints if I have damp filament so probably worth trying drying it. And I've had brand new just opened filament that is damp
Postato : 17/06/2024 7:12 pm
Topic starter
answered:
RE:
Thanks, unfortunately, I just tried it with a different filament and I'm still having the problem.
Questo post è stato modificato 5 months fa da Momo
Postato : 17/06/2024 8:51 pm
Topic starter
answered:
RE: MK4 Print Quality Issue
Turns out you were right. Thank You
Postato : 19/06/2024 3:16 am