Notifications
Clear all

MK4 Print Quality Issue  

  RSS
Momo
 Momo
(@momo)
Active Member
MK4 Print Quality Issue

Recently, all my prints have been coming out terrible. I'm not sure how to describe the issue so I attached a few pictures along with the print files. Doing a full recalibration didn't help and everything passed. Any advise?

Printer: MK4

MMU3: Yes

Firmware Version: 6.0.1+14848

PrusaSlicer 2.7.4

Filament: Prusament PETG

 

Best Answer by JP Guitars:

Looks like mine prints if I have damp filament so probably worth trying drying it. And I've had brand new just opened filament that is damp

This topic was modified 4 weeks ago by Momo
Posted : 17/06/2024 7:05 pm
JP Guitars
(@jp-guitars)
Reputable Member
RE: MK4 Print Quality Issue

Looks like mine prints if I have damp filament so probably worth trying drying it. And I've had brand new just opened filament that is damp

Posted : 17/06/2024 7:12 pm
Momo
 Momo
(@momo)
Active Member
Topic starter answered:
RE:

Thanks, unfortunately, I just tried it with a different filament and I'm still having the problem.

This post was modified 4 weeks ago by Momo
Posted : 17/06/2024 8:51 pm
Momo
 Momo
(@momo)
Active Member
Topic starter answered:
RE: MK4 Print Quality Issue

Turns out you were right. Thank You

Posted : 19/06/2024 3:16 am
Share: