Getting watchdog resets since upgrading MK4 to firmware version 5.0
I am not sure if this is correlated or not, but my MK4 printer appears to randomly crash ever since I upgraded it to version 5.0. I've since upgraded again to 5.0.1, but crashes are still occurring. I haven't been printing anything lately - the printer just sits idle most of the time. Since these crashes have started happening I am not particularly interested in printing anything - at least until the reason for the crashes are identified and resolved.
I use Octoprint to run jobs normally. To eliminate that as a source of the problems I disconnected it from the printer. It still crashes.
I've submitted a bug to github - no comments there yet. Please refer to it for dump logs and photo of the error screen. (BSOD) https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/3450
Does anyone have an idea what might be causing this?
RE: Getting watchdog resets since upgrading MK4 to firmware version 5.0
Facing the same issue on my MK4 as well. It was working perfectly fine for first 15-20 prints and now almost every other print is failing because of that.
RE: Getting watchdog resets since upgrading MK4 to firmware version 5.0
I do have the same issues now. The first prints where fine but now i am getting randomly blue screens , watch dog reset. I upgraded to the latest version 5.0.1 but still have the same issues.