Notifications
Clear all

Mk4 Official Enclosure Filament Guide Question  

  RSS
matrimcauthon
(@matrimcauthon)
Member
Mk4 Official Enclosure Filament Guide Question

I am looking through the enclosure instructions for mk3s since they don't have the full mk4 manual out. I can print the different lcd holders without a problem. I am confused however as to how the modified PTFE tube adaptor is supposed to work on the mk4 extruder. Anyone know the answer to this? Thanks!

Posted : 08/06/2023 2:56 pm
Walter Layher
(@walter-layher)
Honorable Member
RE: Mk4 Official Enclosure Filament Guide Question

A PTFE coupler is part of the hardware included with the enclosure. The MK4 extruder has threads in the filament inlet. Just screw in the coupler and connect the PTFE tube to it.

Posted : 08/06/2023 3:06 pm
Aquaerics liked
matrimcauthon
(@matrimcauthon)
Member
Topic starter answered:
RE: Mk4 Official Enclosure Filament Guide Question

I totally missed the pre threading! Thanks :). 

Posted : 09/06/2023 9:10 pm
Aquaerics liked
Share: