Notifications
Clear all

Tools: What do you recommend?  

Page 3 / 17
  RSS
Andrew
(@andrew-5)
Estimable Member
RE: Tools: What do you recommend?

I use long needle nosed pliers to get the filament before it does the bed levelling and purge. I am however going to either print or buy a plastic set as the metal ones can set off the pinda probe if I get too excited. I did get a set of rather nice set of fine brushes for cleaning nozzles with a batch of cheepo nozzles I for for my Anet A8 a few years back. the printer and nozzles were donated to the face shield cause but I still have the brushes.

The tool I would like however, but cannot find at present, is a soft brass brush to clean the nozzle/hotend of goop. I thought it would be as simple as getting an old fashioned suede brush but these all appear to be plastic now......damn this age thing.

Andrew 

Posted : 02/07/2020 11:10 am
Gordon W
(@gordon-w)
Reputable Member
RE: Tools: What do you recommend?

@andrewld

Are you thinking of brass brushes like these? https://www.wire-brush.co.uk/wirebrushstore/cat_283882-Brass-Hand-Wire-Brushes.html available on amazon /ebay etc.

Posted : 02/07/2020 12:18 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Tools: What do you recommend?

@gordon-w

I have to agree brass brushes are essential.  

In the US, I have found a good price at Harbor Freight: Brass Brushes

and 

Amazon:Brass Brushes

--------------------
Chuck H
3D Printer Review Blog

Posted : 02/07/2020 12:42 pm
Andrew
(@andrew-5)
Estimable Member
RE: Tools: What do you recommend?

@gordon-w

No those are too fierce for my liking. I used to have wooden handled ones about the size of a toothbrush that had soft wire bristles for taking the mud off my desert boots.

Andrew

Posted : 02/07/2020 3:24 pm
Andrew
(@andrew-5)
Estimable Member
RE: Tools: What do you recommend?

@charles-h13

Nice. I didn't see these on amazon UK. Will have another look.

Andrew

Posted : 02/07/2020 3:27 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Tools: What do you recommend?

@andrewld

I will try to post UK links also in the future,  It can be tough to find them. 

--------------------
Chuck H
3D Printer Review Blog

Posted : 02/07/2020 4:37 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Tools: What do you recommend?

@charles-h13

I would recommend a big hot air gun to remove such alien blobs 😋 :

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 02/07/2020 6:36 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Tools: What do you recommend?

@charles-h13

I created my own nozzletool set:

The PEEK (CarbonPEEK) insert is heat-resistant up to 260 degrees C. The torque ratchet can be adjusted. Ideal in tight spaces.

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 02/07/2020 6:47 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Tools: What do you recommend?

@karl-herbert

I like that.  I have never printed peek.  Did you print that on a Prusa?

--------------------
Chuck H
3D Printer Review Blog

Posted : 02/07/2020 6:51 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Tools: What do you recommend?

While I'm at it. I also use this tool very often (Extruder, MMU2, others) to cut and chamfer PTFE's:

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 02/07/2020 6:56 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Tools: What do you recommend?

@charles-h13

Yes, printed it on a mod. MK3 (Pt100 upgrade up to 500 degrees C. , bedboost up to 150 degrees C.).

The fanshroud was also printed with the extrem heatresistant CarbonPEEK ( https://www.filamentworld.de/shop/high-performance-filament/peek-filament/3dxtech-carbonx-1-75-mm-carbon-peek/ ) or ( https://www.3dxtech.com/carbon-fiber-filaments/carbonx-peek-cf/ )

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 02/07/2020 7:03 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Tools: What do you recommend?

Someone in the forum also recommended the tungsten carbide electrodes, which I now use and really appreciate:

https://www.amazon.de/gp/product/B07R6Y2LKS/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 02/07/2020 7:09 pm
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Tools: What do you recommend?

@karl-herbert

That would be me!

 

Did you share the cutting and chamfer tools online?

--------------------
Chuck H
3D Printer Review Blog

Posted : 02/07/2020 7:21 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Tools: What do you recommend?

@charles-h13

Thanks again for the tungsten c. link!

Chamfertool - yes, look here (description in German): https://www.prusaprinters.org/prints/34035-ptfe-multitool

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 02/07/2020 8:29 pm
Flo4Print
(@flo4print)
Noble Member
RE: Tools: What do you recommend?

Beware of cheap brass nozzle which are brass plated steel, you can check with a magnet, they can damage brass nozzle hole if used with vivacity. No problem with hardened steel nozzle of course.

MK3S & Fusion 360

Posted : 02/07/2020 8:33 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Tools: What do you recommend?

@flo-r

I cannot recommend cheap nozzles because high quality nozzles are an important part of successful printing. That's exactly where I don't save my money. And if you use them correctly, you will enjoy them for a long time.

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 02/07/2020 9:39 pm
Flo4Print
(@flo4print)
Noble Member
RE: Tools: What do you recommend?

Ho sorry reading me back I wrote a mistake I wanted to write beware of cheap brass Brushes they can damage brass nozzle because the are brass plated steel. 
By the way I clearly do agree with you about high quality nozzle. 

MK3S & Fusion 360

Posted : 02/07/2020 9:46 pm
Andrew
(@andrew-5)
Estimable Member
RE: Tools: What do you recommend?

@flo-r

No need to apologise. I agree on the cheep nozzles. I'm not saying there aren't good less expensive ones but for now my prints have been so good I wouldn't want to upset the lady by getting her anything Joseph hadn't. 🤣 

 

Posted : 03/07/2020 5:58 am
cwbullet
(@cwbullet)
Member
Topic starter answered:
RE: Tools: What do you recommend?

@karl-herbert

I agree to a point.  I think cheap nozzles are hit and miss.  You have to choose wisely  

--------------------
Chuck H
3D Printer Review Blog

Posted : 03/07/2020 12:17 pm
karl-herbert
(@karl-herbert)
Illustrious Member
RE: Tools: What do you recommend?

@charles-h13

I have been looking for a nozzle like this one  in europe, but I cannot find a supplier: https://www.3dmakerengineering.com/products/tungsten-carbide-3d-printer-nozzle
Maybe someone knows a good source?

Statt zu klagen, dass wir nicht alles haben, was wir wollen, sollten wir lieber dankbar sein, dass wir nicht alles bekommen, was wir verdienen.

Posted : 03/07/2020 10:35 pm
Page 3 / 17
Share: